Anchor for increased Accuracy

All archers need an unchanging anchor point for their draw hand, a location on or below your chin to ensure you have a consistent starting point for your hand and string. One of my Tumbler followers, Andy, asked…

…Since I’m just an amateur with the bow and don’t have any training… why you and archers in general, when they stretch to the full pose, set the hand that is stretching the string with the arrow bellow the chin? That helps for a better accuracy shoot? or is because the type of bow?(sorry I don’t know any terminology if you can help me with that too it would be cool). Thanks for the help…

There are four basic locations for an anchor point; under-the-chin, beside the face, over-hand anchor, and floating anchor, all have there pros and cons depending on your shooting style.

Under the Chin      

Draw the string to the center of the nose and middle of chin. A good anchor point consists of an unchanging triangle with the string touching the center of your nose and the center of your chin and your thumb tucked squarely under your jaw line and the shelf of your index finger riding along your jaw. (Alternatively string to the side of nose and the corner of your mouth however this is typically less accurate for recurve archers and better for peep sight usage on compounds.)

• Advantages: This anchor has multiple touch points for triangular consistency and helps avoid overdrawing.
• Disadvantages: It takes a little longer to position and master, and can be less comfortable depending on the archer.

Side of Face

Typically the string is drawn back until the tip of the index finger is at the corner of the mouth with the hand tight against the face. Some archers tuck their thumb under their jaw.  Depending on the tournament, some archers can face walk for difference distances. (move your hand up and down on your face)

• Advantages: Anchor style can be established quickly and allows bare-bow to sight down the arrow shaft.
• Disadvantages: This style is not typically as precise as under the chin and sometimes leads to plucking the arrow string.

Over-hand (Mechanical Release)

Typically over-hand is associated with a mechanical release. Mechanical release aids offer less interference with the string and are most commonly used by compound shooters and hunters. When having an over-hand release for a compound shooter you would have either your knuckle(s) or your thumb touching behind the corner of your jaw.

• Advantages: Very accurate and it allows your elbow to align with the arrow at release
• Disadvantages: Takes longer to set and position and a release aid needs to be setup based on the individual archer. Also since it very accurate scores are VERY high in competition and you have less room for error.

Floating Anchor (or partly floating)

A floating anchor is another option for some archers, the shape of some people’s jaw can make it difficult to do an under the chin anchor position. Some people take this position literally and have their hand floating in the middle of nowhere; this is really hard to make consistent because you have no point of reference to make the anchor position easily repeatable. However, you could go with a ‘partly’ floating anchor where you can have your hand touching a point of your jaw (or more if you can).

• Advantages: Can provide an easier anchor point  for people with wider jaw lines.
• Disadvantages:  Typically, not as consistent or as easily repeatable.

The anchor needs to be consistent and repeatable  on every shot. Some tips include…

• Keep your head straight and still and bring the string to you so you can easily make your anchor and draw length consistent.
• Chewing bubble gum, talking, or even moving your chin will result in inconsistent shots and therefore lower scores since you are changing the angle of the string as our jaw moves.
• Keeping your shoulders relaxed and in their sockets and pointing your draw arm directly behind you.
• Check your string alignment by matching the blurred image of the string in relation to the bow’s riser.

You will want to establish as many touch points as you can manage to help develop the most consistent anchor. A great consistent anchor leads to a happier more consistent archer.

Adjusting your sights

As a recurve archer, your sight is a vital piece of your equipment. Recently, I had a request to do a blog about the anatomy of a sight and how to adjust it. Although every sight is different, they all have similar components. We will use the Cartel Mighty sight in this example.

A recurve sight is typically made of four components; the riser mount with knob, horizontal extension bar, vertical sight bar, and scope. The riser mount is used to attach the sight to the riser and the knob is used to hold one end of the horizontal extension bar. The vertical sight bar is mounted to the other end of horizontal extension bar with the scope attached to it.  The vertical sight bar and scope have thumb screws that are used to adjust and micro-adjust the scope in relationship to the target.

Most sights have three knobs, one to adjust the length of the horizontal extension bar, one to adjust the height of the scope and one to adjust the left/right location of scope. The latter two usually have both large and micro-adjustments available. When you are ready to start adjusting your sight, remember the simple rule, “Follow the arrow”. Check out my earlier blog called Follow the Arrow: Adjust your sights.

To adjust the length of the horizontal extension bar simply loosen the knob and extend it to the desired length and tighten the knob to secure it. The marks on the bar to help you remember the length so you can set it up again.

To make an adjustment of the vertical location of the scope, loosen the thumb screw fastener and either depress the thumb lever for a large move or turn the micro-knob for small adjustment. Once complete then tighten the thumb screw fastener to secure it.

To make a left or right adjustment of the scope, loosen the thumb screw fastener and either twist the scope in or out for a large change, or twist the tension knob for micro-adjustments and then tighten the thumb screw fastener to secure it.

Once you have adjusted your sight make sure to shoot several arrows to confirm your adjustments. Once you are satisfied with the results, record the location of the sight marks on the vertical sight bar. Remember as you grow, develop muscle and change equipment your sight marks will move. One trick is to add a thin piece of white tape over the sight marks. This allows you to adjust the markings without permanently damaging the sight itself.