Shooting with a Clicker

Every competitive Olympic recurve archer uses a draw length checker or “clicker”. A clicker is a device that assists an archer to draw their bow consistently.  The clicker rides along the side of the arrow and produces a “clicking” sound after it passes over the point, hence the name “clicker”. By consistently measuring the draw length of the arrow, you get a consistent power off the bow and therefore a more consistent grouping of arrows resulting in better scores.

There is a lot of debate of when you should start to use a clicker. Anyone who wants to advance and develop smaller groups should start using a clicker as soon as possible. HOWEVER, since clickers take a lot of discipline, patience and practice, maturity is the key factor; age maturity and shooting maturity. If you are disciplined and maintaining consistent form, then you are ready for a clicker.

Recently, one of my readers asked:

I just wanted to ask, with regards to the form, if I should be expanding my chest during the draw (pulling your shoulders back towards the spine) in order to activate the back muscles to take the load rather than the arms.

Shooting a clicker is a relatively simple process however; it requires the use of back muscles to create something called back tension. By compressing the rhomboid major muscles (between the shoulder blades and spine) together, it will draw the arrow past the clicker for the shot when you are at full draw.

First, you need to determine the ideal location for your clicker. Have a friend mark where the tip of the arrow is at full draw. This will be the initial starting location for your clicker. There are tons of clickers on the market however there are two basic types of clickers; riser-mounted or sight-mounted. Depending where the initial starting location is measured it will help you determine the type you need.

Once you have mounted your clicker follow this shot process.

1. Nock the arrow, with the arrow under the clicker and on the arrow rest.
2. Raise the bow and draw towards your anchor point.
3. Continue to draw the arrow until the tip of the point is still just in contact with the clicker.
4. Aim and while still maintaining, squeeze your rhomboid major muscles together.
5. Once you hear the “click”, relax your fingers and finish the shot.

It is important that you are able to reach your anchor point at full draw. The clicker needs to be within the distance so your rhomboid major muscles can activate the shot. Remember, over the course of an entire day of shooting, your muscles weaken and you will have to work harder to draw the same amount, it may need to be adjusted to find the ideal location for entire day of shooting.

Important: Once you have determined your clicker location, leave it alone. Making any adjustments will affect all your sight marks, and they will need to be adjusted too.

If you have never used your rhomboid major muscles before this is going to take some time to master. Practice using your rhomboid major muscles with the following exercise.

With palms down and your forearms parallel to the floor, bring your fingertips together at chin level. Try squeezing your rhomboid major muscles together. You should witness your fingers spread apart about an inch. This is all the space you need to activate the clicker at full draw.

You can also check out this website for exercises to help develop strength in your rhomboid muscles.

The mastery of a clicker is essential for any competition archer. You will need to work on it regularly however once you master the process a clicker will become your best friend.

Arrows Series – Part 3: Draw Weight

Obviously, force is required to move the arrow forward off the bow and it is generated from the tension of the limbs through the bowstring. Therefore, when purchasing arrows you need to know your draw weight so you can purchase the correct corresponding spine size for best performance. Limbs stiffness is determined by the amount of force, measured in pounds, required to draw the bow to a 28” draw length as outlined in the following Archery Trade Association (ATA) standard.

AMO BOW WEIGHT STANDARD

For Conventional Bows

Bow weight is the force required to draw the nocking point of the bow string a given distance from the pivot point of the bow grip (or the theoretical vertical projection of a tangency line to the pivot point parallel to the string). Draw length from pivot point shall be designated as DLPP and shall be referred to as TRUE

DRAW LENGTH.

For the purpose of uniform bow weight designation, bow weight is the force required to draw the bow string 26 1/4” from the pivot point. This weight will be marked on bow as being taken at 28” draw (26 1/4” plus 1 3/4” = 28”) See DRAW LENGTH STANDARD.

EXAMPLE: Weight Adjustment Range: 45/55 lbs. Weight Set At: 50 lbs.; Hold 32 lbs. Draw Length Range: 29” – 30”

EXPLANATION: The pivot point is a more realistic measuring point (when compared to the variations of profile of the back of bows at the handle section) for establishing bow weight since the pivot point is a constant in all bows as well as the contact point of the bow hand from which the true draw length is generated.

The 26 1/4” DLPP is the approximate equivalent of the 28” draw used previously on the more massive wooden handle bows.

Therefore, your draw weight is a combination of your draw length (See Arrow Series – Part 2 Measurements) and the combination of your riser (23” or 25”) and your limb stiffness (15#-50#).

For example, a 25” riser with a 34# long limb produces a 70” bow with a draw weight of 34 pounds at a 28” draw length.  If these same limbs were used on a 23” riser, the combination would produce a 68” bow with a draw weight of 36 pounds at a 28” draw length.

However, not everyone has 28” draw length, especially young archers whose draw length will change progressively with growth. So as a rule of thumb you can add or subtract approximately two pounds for each inch your draw length is over or under the 28” standard.

Using the previous example, if an archer has a 26” draw length and uses a 25” riser with 34# long limbs it will produce 30# of force at full draw OR uses the 23” riser with 34# long limbs it will produce 32#.

This is very important to select limbs that enable you to develop and compete however do not cause long-term physical damage. When purchasing limbs you need to determine if the limbs are too heavy, you can try this simple 7-second challenge.

7-second challenge

1. Draw the bow to the anchor
2. Hold seven seconds
3. Let down without lowering your hands, stay in set-up position to take a 2 sec brake,
4. Repeat several times.

If you cannot do it properly then the limbs are too heavy for you. If you find this challenge extremely easy, you can look at heavier poundage limbs, if you choose.

Now you understand draw weight and used in combination with your draw length you can see the arrows that match your equipment using a manufacturers arrow selection chart. In the up coming blogs we will try to examine the arrow spine, flex and stiffness.