Now that your center-shot is right, you’ll need to continue to fine-tune your bow periodically to change as you grow and develop as an archer. Start by labelling and numbering your arrows. Labelling your arrows with your name or initials is required for tournaments and sometimes is the only way you can distinguish your arrows from someone else’s; especially if they have the same nocks, shafts and fletchings.
Numbering is a good idea so you can track your arrows, if you have a single stray arrow. If the stray is consistent on every end and the number is the same, it may be that something is not right with that arrow.
Once you know your arrows and can track them, you can further tune your bow by adjusting various components such as the tiller, plunger, nock height etc… . You can perform some or all of these various tuning test to help tune your bow for maximum performance.
Paper Tuning Test: Tuning test involving setting up a piece of paper on a frame, stretching the paper taught, and shooting field-tipped arrows (not broadheads, which will affect the arrow flight) through it starting about 6 ft away.
Bare Shaft Planing Test : Tuning process were one shoots a bare arrow (shaft with no fletchings) for comparison with fletched arrows.
Walk-back Test: Tuning process where groups of arrows are shot at increasing distances to give a useful combined test of both centre-shot and button tension.
As you develop as an archer you will need to make changes and tune your bow. Remember that making multiple adjustments at the same time can be hard to track and can be very confusing. It is important to only make one change at a time and test again.
This concludes the Arrow Series; Thanks and good shooting.