In this blog, we will discuss physically cutting arrows. Remember, the correct measurement for your draw length is from the nock groove point to the end of the shaft NOT including the point.” For most archers, accuracy within half-inch of your draw-length is close enough. If you are competitive and working towards improving groups you may need to cut just a couple millimeters at a time, until you find the optimal length. I recommend you visit your local pro-shop for assistance at this level. For young archers who will grow and change frequently, you need to weigh the cost of arrows versus the ever changing physical size.
Remember: Draw length plus 1” minimum for safety and for young archers draw length plus 2” minimum for safety and growth.
The best way to cut Aluminum and Carbon Fiber is with an Arrow Cut-Off Saw or build yourself one using a Dremel wheel saw. Although when cutting wooden arrows you can use a straight blade such as a saw and I have seen some people use a plumbing pipe cutter and this may be okay for recreational shooting however I would not encourage it.
Quick Tip: The first basic rule of carpentry is measure twice cut once. In archery I like to measure a few more times than that.
Personally, I still get my coach to cut my arrows on their shop machine to make sure they are consistent and clean. Usually, when you purchase arrows at a pro shop, they will assist you cutting your arrows to length, most will even help with the fine-tuning.
Whether you are cutting your own arrows at home or at a shop, cut them a little long and test them out first. Make small adjustments until you are happy with consistent groups. Remember, once you cut them, you cannot make them longer again.