Arrows – The Series (This time, it’s personal)

Since arrows are extremely important for an archer, I thought I would do a couple of blogs about arrows starting with the various components. I will be focusing on arrows for recurve target archers, since there are a lot of articles about arrows for both compound and traditional archery already. Selecting the correct arrows for your best performance is not simple task. There are tons of things to know and understand and it may require some trial and error. In this first blog we will start with the basic components.

An arrow is comprised of four major components the shaft, the point, the nock and the fletching.

Shaft : The shaft is primary structural component of the arrow and all other components are attached to it. Originally arrows shafts were made from wood however new shafts are made from aluminum, carbon fibre or both.  It is very important to properly match the arrow stiffness (or spine) to the archer for the best groups. Spine, or stiffness of the arrow, references how much or little the shaft bends when compressed through the shot and it typically matched by using the archer’s draw length and the bow poundage.

Fletching : Glued towards the back of the arrow, fletching are the airfoils for the arrows designed to stabilize the arrow in flight. Traditionally made from real feathers, target arrow fletching are now typically either plastic feathers or plastic vanes. Most target arrows have three fletches that are attached with a slight twist to help the arrow spin and stabilize faster in the air.  The quicker and more stabile the arrows is, the more consistent your groups will be.

Point : The point, or arrowhead, is the functional part of the arrow that is inserted and glued to the front end. It provides the weight and is typically made of various types of metal include tungsten.  Target points are usually bullet-shaped and designed to penetrate target butts easily without large amounts of damage.

.

Nock : Found at the rear end of the arrow, target nocks are typically made of plastic. They are inserted, capped over or combined with separate medal pins inserts and held in place by friction. Target nocks are designed to gently pinch the bowstring to hold it in place when the bow string is drawn.

.

Over the next few blogs we will dive deeper about these components, various discussion concepts like center shot, arrow indexing and numbering your arrows in upcoming posts and help understanding things like spine and Archer’s Paradox.

Remember, this blog is not meant cover everything about arrows. I am still learning and visit my coach regularly to help me develop my understanding about everything archery. I encourage you to share your knowledge and experiences so we can all develop together.

Remember Cartel Doosung offer a wide variety of arrow lines including aluminum and carbon fiber including their new line of Arista arrows for young archers. If you are in the market for some new arrows check my earlier blog about selecting and purchasing arrows.

Advertisements

Adjusting your sights

As a recurve archer, your sight is a vital piece of your equipment. Recently, I had a request to do a blog about the anatomy of a sight and how to adjust it. Although every sight is different, they all have similar components. We will use the Cartel Mighty sight in this example.

A recurve sight is typically made of four components; the riser mount with knob, horizontal extension bar, vertical sight bar, and scope. The riser mount is used to attach the sight to the riser and the knob is used to hold one end of the horizontal extension bar. The vertical sight bar is mounted to the other end of horizontal extension bar with the scope attached to it.  The vertical sight bar and scope have thumb screws that are used to adjust and micro-adjust the scope in relationship to the target.

Most sights have three knobs, one to adjust the length of the horizontal extension bar, one to adjust the height of the scope and one to adjust the left/right location of scope. The latter two usually have both large and micro-adjustments available. When you are ready to start adjusting your sight, remember the simple rule, “Follow the arrow”. Check out my earlier blog called Follow the Arrow: Adjust your sights.

To adjust the length of the horizontal extension bar simply loosen the knob and extend it to the desired length and tighten the knob to secure it. The marks on the bar to help you remember the length so you can set it up again.

To make an adjustment of the vertical location of the scope, loosen the thumb screw fastener and either depress the thumb lever for a large move or turn the micro-knob for small adjustment. Once complete then tighten the thumb screw fastener to secure it.

To make a left or right adjustment of the scope, loosen the thumb screw fastener and either twist the scope in or out for a large change, or twist the tension knob for micro-adjustments and then tighten the thumb screw fastener to secure it.

Once you have adjusted your sight make sure to shoot several arrows to confirm your adjustments. Once you are satisfied with the results, record the location of the sight marks on the vertical sight bar. Remember as you grow, develop muscle and change equipment your sight marks will move. One trick is to add a thin piece of white tape over the sight marks. This allows you to adjust the markings without permanently damaging the sight itself.