Bowstring Wax

Applying bowstring wax is part of regular maintenance and the main purpose is to help prolong the life of your string. It also helps keep the string together longer, maintain the number of twists in the string and protect the string from fraying and moisture.

uvbowwaxUsually manufactured strings are purchase pre-waxed and only need to be maintained. How often depends on the amount you shoot and the condition of the string. Often you can tell if your bowstring needs waxing as small “hairs” or “fuzz” appear on your string. This happens because bowstrings are made-up of multiple strands and the fibers get dried-out and separate from regular shooting and the elements.

To re-apply bowstring wax to an existing string, apply wax to all sides of the string (avoiding the center serving) and use your fingers and rub it up and down 360 degrees of the string, this will heat the wax up so that it is able to soak into the string.

Quick Tip: You can use a piece of dental floss to spread the wax by wrapping the floss around the string once, holding both ends and dragging it up and down. Note: It has been my understanding that using leather is another option however this must be done very carefully as it can also damage the string.

For those of you who choose to make your own strings, you will need to apply bowstring wax several times before shooting the bow the first time.

Bowstring Wax is usually a silcone-based wax sold in tube form for easy application and is usually available at almost archery retailer or repair shops. Alternatively some archers use bees wax mixed with other materials to produce their own recipes. Here are a couple of recipes I found on the web include

  1. 2 parts beeswax to 1 part anhydrous lanolin (available from pharmacies)
  2. 4 parts beeswax to 1 part pine sap
  3. One pound of bees wax and one wax toilet ring seal, melted together
  4. 3 parts beeswax and 1 part coco butter
  5. 50% bear grease (rendered bear fat) and 50% beeswax
  6. 3 parts bees wax and 1 part toilet bowl wax ring.
  7. OR Pure bees wax needs no softening, it is perfect like it is

Proper maintenance will help keep your string in tip-top shape and tournament ready and help make a string last several years. However there are times when you should replace your string and in the next blog we will discuss string replacement.

Advertisements

Follow the Arrow: Adjust your sights

Unless you are a traditionalist, one of the first things you will need to do as an archer is adjust your sight. Unless you are a compound shooter with the same setup for ever, you will need to make adjusts again and again. For recurve archers there are many reasons why you will need to make adjustments including…

Environmental Differences : Every location is different, wind, rain; check out my earlier blog about Weather Conditions here.

New Distances : As you develop and change categories, distances change. Junior women need to shoot 70M and junior men 90M, if you are not there yet, do not worry, you will be.

Growth : As you get older, your body changes, you get taller and stronger and your draw length changes, using a clicker can help with consistency, so check out my Clicker blog.

Equipment Changes : As you get stronger and you are required to reach longer distances you need to change equipment, such as higher poundage limbs. Eventually equipment wears outs and we all want the latest and greatest technology.

Archery Form Changes : As you develop as an archer, you will perform better as an archer and your archery form will get better.

For young recurve archers adjusting a sight is a frequent event and is actually quite easy, the hard part is resisting the temptation to adjust it after every shot. Remember that consistency is your ultimate goal, so track your arrows before making any adjustments. You can do this on paper or there is an awesome free application for your IPod Touch called Archery Score Free by Yakoob Ali.  Once you are warmed up begin to track your arrows and determine the centre of your arrows grouping and then move the sight accordingly. Remember, if your groups were good yesterday and are not today, evaluate your form first. Also, if you have one arrow consistently out of group, check the arrow for defects.

When you are ready to adjust your sight, apply this simple rule, “Follow the arrow” or in this case the centre of the group of arrows. If the centre of your arrow grouping is to the left, then move your sight towards the left or opposite if your group is to the right.  The same principle applies for the group’s height; move your sign up or down if the group is not centered.  By moving the sight towards the arrow, the trajectory of the bow is altered to better centre the arrows on the target.

Remember, consistent form is essential to archery, and before you start micro-adjusting be sure you are grouping consistently first. Otherwise, if you are always making changes to your sight you will never truly know if you will consistently hit the bulls-eye.