Bow Tuning – Advanced Tuning part 2

IMG_7304In this last part of advanced bow tuning series, I will direct you to the expert documents that cover the fine tuning for a recurve bow.

For advanced tuning for plunger and tiller/brace height, I recommend checking out Tuning for Tuning for Tens by Rich Stonebraker and Bow Tuning by Ten Zone. Although both cover the same material both documents together create a great understanding of the tuning methods.

Lastly, is stabilization I recommend reading Going Steady by Andrew Smith. Andrew explains the principles behind using stabilizers, the various types available and how to set one up.

Remember changing one thing can affect the other components and the plunger is no exception. As an example, I changed to a new stabilizer long rod and ended up having to adjust my plunger to compensate.

Apply the simple rule of incremental changes all the while watching for reactions to the change.  That’s the best way to tune a bow, in small steps… Be patience and test each change.

Advertisements

3 thoughts on “Bow Tuning – Advanced Tuning part 2

  1. We believe the performance analysis section of ArcherZUpshot will be of great use in your tuning protocol…. mathematical analysis and comparison of results before and after each incremental change could remove some subjective bias from the process.
    Cheers!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s