Bow Tuning – Advanced Tuning

So far in this series, we started by discussing the basic Olympic recurve bow setup. We covered what tools you require for bow tuning and to basically setup your bow. This included limb alignment, how to measure, installing the arrow rest, nocking point and setting up your basic center shot.

Now that your bow is basically setup, you have been practicing with it and have a fairly consistent arrow group it is time to do some advanced tuning of your bow. Remember that basic step-up and tuning can be done quickly to get you started however advanced tuning is a time consuming task through trial and error.  Proper shooting technique is always the first thing every archer should focus on. If you are still struggling with the basics then get your bow basically setup and work on consistency.  To avoid massive amounts of frustration, it is very important to focus on changing and tuning one thing at a time. Read my earlier blog about Consistency and Change.

Next we will focus on individual areas for you to tune such as nocking points, bowstring fit, centering, clearance, brace height, sight alignment, tiller, clicker and plunger adjustment. Since I already created several blogs about tuning specific components your bow, you should start by reviewing the following…

Sight : Following the arrow and adjusting your sights

Clicker : Adjusting and shooting with a Clicker.

Arrows and various tuning methods : Arrow Series – Part 8 – Fine Tuning and Numbering

Remember, bow tuning is an advanced technique and if you can I recommend you employ the knowledge and experience of a trained coach, since another pair of eyes can really help make the difference between a good tuning and perfection. In the next part of the series we will continue and take a deeper dive into the remaining areas of your bow that can be tuned.